Pressure dew point Transmitter 4 ... 20 mA with display

Measuring range –60 ... +40 °C tpd, compact transmitter with current interface 4 ... 20 mA and three wire connection for measurement of pressure dew point directly in process, pressure-resistant sensor head of stainless steel V2A with 1/2“ threads, stainless steel sinter filter, pressure 0 ... 1.7 MPa (17 bar), robust aluminium housing IP 65, 4-pin industrial plug

Technical data
Measuring range: -60 ... +40 °C tpd
Measuring medium: Compressed air (filtered and dried, ISO 8573-Class 2-4-2)
Sensor element: Capacitive polymer thin film sensor
Sensor protection: Stainless steel sinter filter 1.4404, Ø 12 x 20 mm
Application temperature: -20 ... +60 °C
Storage temperature: -40 ... +90 °C
Accuracy, at 25 °C Nominal temperature:
d ±0.5 K ±1 Digit in range 0.0 ... 40.0 °C tpd
d ±1 K ±1 Digit in range –20.0 ... 0.0 °C tpd
d ±2 K ±1 Digit in range –40.0 ... -20.0 °C tpd
d ±5 K ±1 Digit in range –60.0 ... -40.0 °C tpd
Operating pressure: 0 (Vacuum) ... 1.7 MPa (17 bar absolute)
Display: red LED-display, 10 mm
Measured values: 4-digit °C / °F, Display resolution 0.1 °C / °F tpd
Functions (adjustable at works): °C or °F, calibration of analog output (optional)
Analog output: 4 ... 20 mA for –60 ... +40 °C tpd
Electrical connection: 4-pin Industrial plug DIN EN 175 301-803-C
Process connection: Threads G ½“, SW 27, immersion depth approx. 37 mm with Filter
Sealing: Sealing flange with edge sealing ring NBR (optional VITON)
Dimensions: 190 x 30 x 30 mm (over everything with plug)
Weight: 350 g
Power supply: 24 V DC, max. 100 mA, reverse polarity protected
EMV: As per EG-Guidelines 89/336/EWG
Material: Electronics - aluminium anodised, Measuring head - stainless steel 1.4305
Enclosure type: IP 65 (with connector fitted)
Guarantee: 12 Months
Scope of supply: Transmitter with connection plug, test certificate and documentation

Rights reserved for change in technical data!